When replacing your roof, it’s very easy to get caught up in shingle color and brand. Before you rush into that, make sure your contractor is not skimping on the underlayment. Not all underlayment is created equal. Not all contractors install underlayment in the same locations.
Carlson Exteriors uses Winterguard, CertainTeed’s brand of ice and water barrier. Per city code this barrier is placed at all valleys and at the eaves. However, there are locations this barrier should be applied that are not required by city code. These locations are all roof penetrations (such as vents or furnace flues), around chimneys, skylights, and anywhere a roof line meets a siding wall. These joining areas are first susceptible to leaks if your home is not sealed correctly by using a ice and water barrier. Many manufacturers require these additional areas to have an ice and water barrier applied to qualify for the roof or shingle warranty.
Make sure your contractor is not using a 15lb or 30lb felt. This used to be contractor’s only option but the roofing industry has evolved into synthetic felts. The old felt would tear easily and gave no traction to installers. If your home has the old felt under your shingles, if any shingles would blow off your flimsy felt would be left exposed. If exposed for too long, it will rip leaving your OSB to fend for itself. Synthetic felt eliminates this problem. Synthetic felt is extremely durable and resistant to ripping or tearing. Installers also prefer it when installing because it’s easier to work on.
When you meet with a contractor, remember more than the shingles are working to protect your home from roof leaks or ice dams. The whole roofing system, combined together, protects your home.
Seems funny to apply the word “rogue” to humidity. But during midwest winters it fits. Here’s why:
Every winter is bound to have a couple days to a couple weeks of below zero weather. When temperatures start to rise, homeowners start to notice brown spots on their ceiling that resemble roof leaks. This could be a sign of a roof leak; it could also be a sign that the home’s humidity was too high during the cold temperatures- causing attic condensation to freeze.
Many homes have humidifiers on their furnaces. Almost all new homes have this or homes with real wood floors. It’s a great thing to have, but homeowners need to be mindful of appropriate humidity levels. If the humidity is set higher than it should be during negative temperatures, the moisture rises up to the attic and before it can escape, it hits the bottom of the snow covered roof and freezes. Sometimes icicles even form off the nails! Once the weather warms up and one of the first things to thaw is attic condensation. Depending on high the humidity has been set on your house, this can be a decent amount of moisture coming down – thus causing brown spots on ceilings. It looks identical to spots from roof leaks.
Tea staining or brown spots can form on your ceiling as frozen attic condensation melts during winter months.
What is the appropriate level of humidity for your home?
If the outside weather is…
20 to 40 degrees, humidity should be less than 40%
10 to 20 degrees, humidity should be less than 35%
0 to 10 degrees, humidity should be less than 30%
-10 to 0 degrees, humidity should be less than 25%
-20 to -10 degrees, humidity should be less than 20%
below -20 degrees, humidity should be less than 15%
This will prevent attic condensation, mold, or any other issues caused by overly humid and warm air.
What about you?
These guidelines are the optimal levels to make your home comfortable, but what about the people living in it? Dryer air is not always the best for us to live in but there are ways to keep both you happy and your home comfortable. Instead of using whole house humidifiers use individual ones when you are using the room. Use programmable timers to turn on and off humidifiers. Buy indoor humidity sensors – these range from $5-$50. Click here to see the “indoor hygrometers” on Amazon.com
It’s so easy to forget to monitor or change your humidity. Many people don’t even realize this is what’s going on until it’s too late – brown spots appear! If this happens to you, don’t panic but it’s still good practice to have a trusted roofer inspect to confirm no roof leaks.
Have you noticed a wet or tea-stained ceiling? It could be from a bad or old pipe flashings. The usual life span of a pipe flashing is 10-15 years but depends on your region’s weather conditions. If you keep an eye on all of your pipe flashings it could save you hundreds of dollars repairing any interior damage that can occur from a leak. Look for any signs of extreme age, deterioration, or cracking. Watch the video to see how easy it is to replace your own pipe flashing!